Licensed Electrical Contractor · ECRA/ESA #7018810 Verify on ESA

Hours: Every day · 9 AM – 7 PM @rdelectric.services

Why does my circuit breaker keep tripping?

If your circuit breaker keeps tripping, there is usually a reason for it. A breaker is not just an ON/OFF switch. It is a safety device designed to protect the electrical circuit when something isn't operating within safe conditions.

One of the most common problems we see at RD Electric Services is an overloaded circuit. This happens when homeowners connect more electrical load to a circuit than it was designed to handle.

However, an overload isn't the only possible cause. A breaker that repeatedly trips can also indicate a faulty appliance, short circuit, ground fault, damaged wiring, loose connection, or another electrical problem.

If your breaker trips once, resetting it may restore power. If it keeps happening, the important question is:

Why is the breaker tripping in the first place?

Let's look at some of the most common causes.

1. The circuit is overloaded

A circuit overload happens when the electrical devices connected to a circuit demand more current than the circuit is designed to safely carry.

This is something we commonly see in residential homes.

For example, imagine a basement with several receptacles on the same circuit.

During most of the year, the circuit might only supply a television, computer, lamps and a few small devices.

Then winter arrives in Ontario and the basement gets cold.

Someone plugs in a portable space heater.

Then another device is turned on.

Suddenly, the electrical demand on that circuit is much higher than usual.

Eventually, the breaker trips.

In this situation, the breaker may actually be doing exactly what it is designed to do.

2. Space heaters are a common cause of tripping breakers

Portable electric heaters use a significant amount of power.

A typical 1,500-watt space heater operating on a 120-volt circuit draws approximately 12.5 amps.

That is already a substantial load for a residential branch circuit.

Now imagine that the same circuit is also supplying a television, computer, lights or other equipment.

It doesn't take much additional load before the circuit becomes overloaded.

This is why we frequently hear something like:

"Everything was working normally until I plugged in the heater."

That information is extremely useful when troubleshooting.

If your breaker only trips when a space heater is operating, the total load on the circuit is one of the first things that should be considered.

3. Hair dryers can also draw a lot of power

Bathrooms are another place where we encounter overloaded circuits.

Many homeowners don't realize how much power a modern hair dryer can use.

Some powerful hair dryers operate around 1,500 watts or more.

If a hair dryer is being used while other equipment is operating on the same circuit, the combined electrical load may be enough to trip the breaker.

We've encountered situations where homeowners were having repeated problems when using powerful hair dryers and other bathroom equipment.

In certain situations, after evaluating the existing electrical system and intended equipment, installing an appropriate dedicated circuit can be the proper solution.

The important point is that repeatedly resetting the breaker doesn't solve an overloaded circuit.

The electrical load needs to be understood first.

4. Be careful with appliances brought from Europe

Another issue we occasionally encounter in the GTA is electrical equipment brought from another country.

Canada generally uses a 120/240V, 60 Hz residential electrical system, while many European appliances are designed around approximately 230V, 50 Hz power.

A simple plug adapter does not convert voltage or frequency.

Before using an appliance purchased in another country, always check the manufacturer's electrical rating.

Look at the label on the appliance or power supply.

If the equipment is not designed for the electrical supply available in Canada, simply changing the plug or using an adapter may not make it suitable or safe to use.

This is particularly important with high-powered appliances.

5. The appliance itself could be the problem

Sometimes the electrical circuit is perfectly capable of handling the expected load.

The problem may actually be the appliance.

A damaged appliance can cause a breaker to trip because of an internal electrical fault.

One useful question is:

Does the breaker only trip when one particular appliance is connected?

For example, if the circuit operates normally all day but trips every time one particular appliance is turned on, that appliance becomes an important part of the troubleshooting process.

Try to remember exactly what was operating immediately before the breaker tripped.

That information can help an electrician determine whether the problem is related to the circuit, the connected load or the equipment itself.

6. A short circuit can trip the breaker

An overload happens when too much current is being demanded by otherwise operating equipment.

A short circuit is different.

A short circuit can occur when conductors that should not be electrically connected come into contact or when a fault creates a very low-resistance path.

This can cause a large amount of current to flow very quickly.

The breaker should respond by opening the circuit.

If a breaker trips immediately every time you attempt to reset it, do not continue switching it back ON repeatedly.

There may be a fault that requires professional troubleshooting.

7. A ground fault may also cause the circuit to trip

Depending on the circuit and protection installed, a ground fault can also cause protective equipment to operate.

This is particularly relevant in locations where GFCI protection is required or installed, such as bathrooms, kitchens, garages and exterior areas.

If a GFCI or breaker repeatedly trips, there may be a problem with connected equipment or the circuit itself.

Repeatedly resetting the protection without finding the cause is not a proper repair.

8. Loose or damaged wiring can cause electrical problems

Not every tripping breaker is caused by an appliance.

Problems can also exist within the electrical system itself.

Possible issues can include:

  • loose electrical connections
  • damaged conductors
  • damaged receptacles
  • damaged switches
  • wiring affected during renovations
  • deterioration of electrical components
  • incorrect previous electrical work

This is why diagnosing a repeatedly tripping breaker sometimes requires more than simply looking at the electrical panel.

The entire affected circuit may need to be investigated.

9. Why does my breaker trip when I use multiple appliances?

This is often a load issue.

Imagine that several receptacles are supplied by the same branch circuit.

You might have:

  • a computer
  • television
  • lighting
  • space heater
  • vacuum
  • hair dryer
  • other portable equipment

Not everything necessarily operates simultaneously.

But when several high-power devices are turned on at the same time, their combined load can become too much for the circuit.

The breaker doesn't know whether you plugged in a heater, hair dryer or vacuum.

It responds to the electrical conditions on the circuit.

10. Why does my breaker trip when I use my hair dryer?

A hair dryer can be a significant electrical load.

If the bathroom receptacle shares a circuit with other loads, turning on a powerful hair dryer can contribute to an overload.

However, don't automatically assume that the solution is installing a larger breaker.

Never increase the breaker size simply because the existing breaker keeps tripping.

The breaker size must be appropriate for the conductors and electrical installation it protects.

Installing a higher-rated breaker without determining whether the wiring is designed for it can create a serious safety hazard.

Instead, an electrician should determine why the existing circuit is tripping and whether the electrical system needs to be modified.

11. Do I need a dedicated circuit?

Possibly.

Certain equipment requires dedicated or otherwise specifically designed branch circuits under applicable electrical requirements. In other situations, a dedicated circuit may be appropriate because of the electrical load and how the equipment is intended to be used.

The correct solution depends on the equipment, its electrical rating, the existing wiring and the requirements of the Ontario Electrical Safety Code.

At RD Electric Services, we first determine what is actually causing the breaker to trip before recommending additional electrical work.

Sometimes the problem is simply how equipment is being used.

Sometimes an appliance is defective.

And sometimes an additional or dedicated circuit is the appropriate solution.

12. Should I replace the breaker if it keeps tripping?

Not automatically.

This is a common mistake.

When a breaker repeatedly trips, some homeowners assume:

"The breaker must be bad."

Breakers can fail, but a tripping breaker may simply be responding to a problem somewhere else.

Replacing it without diagnosing the circuit could leave the original problem unresolved.

The first question should always be:

What is causing the breaker to trip?

Only after the cause has been identified should the appropriate repair be determined.

What can you safely check yourself?

You can gather useful information without opening the electrical panel or removing electrical devices.

Pay attention to what was running

Think about what was operating immediately before the breaker tripped.

Was it:

  • a space heater?
  • hair dryer?
  • microwave?
  • vacuum?
  • portable air conditioner?
  • another high-powered appliance?

Disconnect unnecessary appliances

If several portable appliances are connected to the affected circuit, disconnect unnecessary equipment.

If the problem only occurs when a particular device is used, stop using that device until the cause is understood.

Look for a pattern

Does the breaker trip:

  • immediately?
  • after several minutes?
  • only when the heater is running?
  • only when a particular appliance starts?
  • only when several appliances operate together?
  • randomly throughout the day?

The pattern can provide important clues.

What should you NOT do?

Do not repeatedly reset a breaker that continues to trip.

Do not replace a breaker with a higher amperage breaker simply to stop the tripping.

Do not open an electrical panel or work on energized wiring unless you are qualified to perform that work.

And do not assume that a breaker is defective simply because it trips.

The breaker may be warning you about another electrical problem.

When should you call an electrician?

Consider having the circuit inspected if:

  • the breaker repeatedly trips
  • the breaker trips immediately after being reset
  • you smell something burning
  • a receptacle or switch feels unusually hot
  • you hear buzzing or crackling
  • you notice discoloration
  • the problem started after renovation work
  • the breaker trips even with appliances disconnected
  • you regularly need to unplug devices just to keep the circuit operating

These symptoms may require professional electrical troubleshooting.

How does an electrician troubleshoot a tripping breaker?

The goal is not simply to make the breaker stay ON.

The goal is to determine why it is opening the circuit.

Depending on the situation, troubleshooting may include evaluating the connected electrical load, identifying equipment supplied by the circuit, checking for problems with connected appliances, and inspecting the circuit for electrical faults.

Once the actual cause is known, an appropriate solution can be recommended.

That might involve repairing a connection, replacing a damaged device, addressing faulty equipment, redistributing electrical loads, or installing an appropriate new circuit where required.

Is a breaker that keeps tripping dangerous?

The tripping itself is a protective action.

The condition causing it may be the concern.

A breaker should not need to be reset every day as part of normal operation.

If it repeatedly trips, something is causing the protective device to operate.

Ignoring that warning or trying to bypass the protection is not a solution.

Need help with a breaker that keeps tripping?

If your circuit breaker keeps tripping and you aren't sure why, RD Electric Services can troubleshoot the problem and determine what is happening on the circuit.

We provide residential electrical troubleshooting, repairs, new circuits, panel work and electrical installations throughout Vaughan, Toronto and the GTA.

Whether the problem is an overloaded circuit, faulty appliance, damaged wiring or a circuit that needs to be properly designed for your electrical load, the first step is identifying the actual cause.

Contact RD Electric Services to schedule electrical troubleshooting.

All articles

Get a free quote

Tell us about the job and we'll get back to you with a clear price. For anything urgent, call.

RD Electric Services Inc. · Licensed Electrical Contractor · ECRA/ESA #7018810 · verify on ESA

Property

Best way to reach you

We only use your details to reply to your request. See our privacy policy.

Call now Free quote